Nanite News
Recent News |  Archives |  Tags |  About |  Newsletter |  Links | 
New Articles
Self-assembled nanowires could make chips smaller and faster 4/22/2009

Bridging the gap in nanoantennas 4/21/2009

Novel technique shrinks size of nanotechnology circuitry 4/18/2009

Singapore scientists synthesize gold to shed light on cells' inner workings 4/17/2009

Researchers unzip the future 4/16/2009

Next generation nanofilms created 4/15/2009

New 'near-field' radiation therapy promises relief for overheating laptops 4/14/2009

New laser technique advances nanofabrication process 4/11/2009

First tri-continuous mesoporous Silica complex structure developed in Singapore 4/9/2009

Team builds world's first nanofluidic device with complex 3-D surfaces 4/4/2009

Researchers peer into nanowires to measure dopant properties 4/3/2009

Magnetic nano-'shepherds' organize cells 4/2/2009

DNA-based assembly line for precision nano-cluster construction 3/31/2009

New nanogenerator may charge iPods and cell phones with a wave of the hand 3/28/2009

Fitter frames: Nanotubes boost structural integrity of composites 3/27/2009

Team takes first atomic-scale compositional images of fuel-cell nanoparticles (10/6/2008)

Tags:
nanoparticles, electronics, fuel cells

Left image highlights two platinum-cobalt catalyst nanoparticles (inside the dashed boxes) with a 'sandwich' structure of platinum and cobalt atoms near the surface. At right is a cross-sectional model corresponding to the lower particle, showing platinum atoms enriched in the outermost layer, cobalt enriched in the second, and additional layers containing a mixture of the two. (Image at left taken at Oak Ridge National Laboratory.) - Image Credit: Electrochemical Energy Laboratory at MIT
Left image highlights two platinum-cobalt catalyst nanoparticles (inside the dashed boxes) with a 'sandwich' structure of platinum and cobalt atoms near the surface. At right is a cross-sectional model corresponding to the lower particle, showing platinum atoms enriched in the outermost layer, cobalt enriched in the second, and additional layers containing a mixture of the two. (Image at left taken at Oak Ridge National Laboratory.) - Image Credit: Electrochemical Energy Laboratory at MIT
Work could lead to better catalysts for eco-friendly energy storage devices

In a step toward developing better fuel cells for electric cars and more, engineers at MIT and two other institutions have taken the first images of individual atoms on and near the surface of nanoparticles key to the eco-friendly energy conversion devices.

Nanoparticles made of platinum and cobalt are known to catalyze some of the chemical reactions behind fuel cells, making those reactions run up to four times faster than if platinum alone is used as the catalyst.

No one, however, understands exactly why. That's because "little is known about the nanoparticles' surface atomic structure and chemistry," which are key to the particles' activity, said Yang Shao-Horn, an associate professor in the Department of Mechanical Engineering and Department of Materials Science and Engineering and director of the Electrochemical Energy Laboratory at MIT.

Using a new technique known as aberration-corrected Scanning Transmission Electron Microscopy, Shao-Horn's team, in collaboration with Professor Paulo Ferreira of the University of Texas at Austin and Dr. Larry Allard of Oak Ridge National Laboratory, identified specific atomic structures near the surface of such a catalyst. That information in hand, the researchers propose a theory for why the material is so active. Perhaps most importantly, "knowing the surface composition will help us design even better catalysts," Shao-Horn said.

The work was reported in the Sept. 24 online issue of the Journal of the American Chemical Society.

The researchers analyzed platinum and cobalt nanoparticles that were either treated with acid, or treated with acid then subjected to high heat. Nanoparticles produced both ways are known to be more active than platinum alone. Shao-Horn and colleagues found that each, in turn, also had slightly different surface structures.

For example, in the nanoparticles subjected to heat treatments, the platinum and cobalt atoms formed a "sandwich-like" structure. Platinum atoms covered most of the surface, while the next layer down was composed primarily of cobalt. Successive layers contained mixtures of the two.

The team proposes that these particular nanoparticles are up to four times more active than platinum alone because the platinum atoms on the surface are constrained by the cobalt atoms underneath. "This modifies the interatomic distances between the platinum atoms on the nanoparticle surface," making them more effective in chemical reactions key to fuel cells, Shao-Horn said.

She further noted that "this work bridges the gap between our understanding of electrocatalysis in bulk materials and at the nano-scale."

In addition to Shao-Horn, Allard, and Ferreira, who is also an MIT research affiliate, other members of the research team are Shuo Chen, first author of the paper and a postdoctoral associate in mechanical engineering; Wenchao Sheng, a graduate student in chemistry; and Naoaki Yabuuchi, a research affiliate in mechanical engineering.

The Department of Energy and the National Science Foundation, through its Materials Research Science and Engineering Center program, funded the work.

Note: This story has been adapted from a news release issued by MIT

- - Credit Counseling -

Post Comments:

Search



Archives
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007


Science Friends
Astronomy News

Cognitive Research
Chemistry News
Tissue Engineering
Cancer Research
Geology News
Physics News
  Archives |  Advertise With Us |  Contact Us |  Links
All contents © 2000 - 2010 Web Doodle, LLC. All rights reserved.